Canada WORKSHOP
 
 
Product Name
Key Features
Aerosol Products
AIR INTAKE CLEANER

An aerosol throttle body/air intake cleaner that removes deposits from the air intake, throttle body and the idle air bypass to correct rough idle, stumble, stalling and poor performance. It will not harm On Board Diagnostic (OBD) computers, throttle body coatings, oxygen sensors and catalytic converters.

Part #9307

CARB & CHOKE

Removes gum, varnish, oil, dirt and moisture, in order to provide smooth and efficient operation of all critical parts. Use on cool parts and engines only. Spray linkages, springs, and connections until clean. It dries fast, leaving no residue, and will not harm wiring or insulation.

Part #9418

SUPER SPRAY

Contain a unique anti-friction compound to provide a long lasting protective film. Penetrates deeply to loosen parts seized by rusts, corrosion, shellac, carbon, varnish, and gum residues. It stops rust and corrosion, and displaces water and moisture completely from electrical systems exposes to the elements.

Part #9414

PROLUBE

Exceeds the performance parameters of all other commercially available aerosol lubricants. It effectively lubricates all types of materials, machinery and mechanisms in easily accessible as well as hard to reach areas. An excellent penetrant that will displace water 100%, will loosen nuts and bolts, and stop and prevent rusting. Dielectric, it works at cold temperatures as low as -70°C

Part #9866

CHAIN LUBE

It penetrates into rollers to provide cushioning against the severe shock loads of acceleration and braking. Anti-wear and anti-rust additives extend chain and sprocket life. Its waterproof formula resists washout even under severe off-road conditions.

Part #6316

BRAKE PARTS CLEANER

A multi-use brake parts cleaner that quickly removes brake fluid, grease, oil, and other contaminants from all brake pads, drums, springs, callipers, cylinders, and other related brake parts. Its special non-chlorinated formula degreases instantly and dries quickly, leaving no residue.

Part #9415

BRAKE PARTS & CONTACT CLEANER

A fast drying multi-use aerosol cleaner that quickly dissolves grease, oil, and gummy deposits from brakes, clutches, electrical contacts, and miscellaneous components. Non-flammable formula, degreases and dries instantly, leaving no residue.

Part #6320

BATTERY JUICE

Formulated to prolong battery life and assure maximum battery performance while providing proper current flow. It eliminates power leaks and prevents damage to cables and terminals. Recommended for use on cars, trucks, buses, golf carts, fork lifts, as well as construction and agricultural equipment.

Part #94145

Greases
MULTI-PURPOSE #1

A general purpose lithium grease formulated with good pumpability and resistance to water wash-out, in order to meet the typical requirements of industrial, automotive, heavy-duty fleet and agricultural equipment.

Part #9010

CRYSTAL #2

Bardahl Crystal Synthetic Grease is a multiple action synthetic grease that works over a wide range of temperatures and is designed for use in food processing equipment, refrigeration equipment and applications that require an EP grease with a wide operating temperature range.

Part #9030

HD EQUIPMENT MOLY #2

A strong multi-purpose water resistant lithium 12-hydroxy grease fortified with 3% molybdenum disulfide to reduce wear by maintaining lubrication under conditions of high friction and shock loads in construction, forestry and industrial applications.

Part #9045

POLYSYN 555 SYNTHETIC #2

Bardahl POLYSYN 555 Synthetic Grease #2 is a red tacky-adhesive multi-purpose EP grease designed to stay in place in the most severe water-wash-out and shock loading conditions. 

Its 70 lbs Timken OK Load and superior antiwear and extreme pressure performance, make it ideal for all agricultural, automotive, fleet, industrial and marine applications.

Operating temperature range of -40°C to 315°C.

Part #9055

MOLY EP #2

A water resistant lithium grease fortified with 1% molybdenum disulfide to reduce wear by maintaining lubrication under conditions of high friction and shock loads in heavy equipment and agricultural machinery where the possibility of product contamination exists.

Part #9060

Sealant
PIPE SEALANT WITH PTFE
  • Certified ANSI/NSF 61 - Drinking Water System Components
  • Seals instantly under moderate pressure and cures at room temperature
  • Superior resistance to a wide range of chemicals
  • Controlled strength for easy disassembly
  • Locks pipes and fitings against vibration loosening, tampering, and variable temperature effects
  • For Automotive - Appliance - Construction - Plumbing - Utilities - Petroleum Refining Chemical Processing

Part #45015

Material Safety Data Sheet (MSDS) also available

 
PRIVACY / LEGAL
Copyright © BARDAHL, 2013 -- BARDAHL in Canada by AUTO-MOTO CANADA Inc. Exclusive Distributor