Application
ENGINE
1. Pour the contents of
the PROTEX #94100 MTS CLEANER bottle into the
engine.
2. Run the engine at idle for 15 to 30 minutes.
3. After the recommended elapsed time, stop the motor
and drain the oil.
4. Install a new oil filter and when adding new oil to
the crankcase, also add
PROTEX # 93400 Pro-1 Oil Supplement for added
protection.
TRANSMISSION
1. Pour the contents of
the PROTEX # 94100 MTS CLEANER bottle into the
transmission.
2. Run the engine at idle for 15 to 30 minutes.
3. Shift repeatedly through all the gears for 2 minutes.
4. Drain the transmission fluid.
5. Add new transmission fluid BARDAHL # 57100 or #
57105
until it flows like new from the drain. Also add
PROTEX # 93250 Automatic Transmission Treatment for
added protection.
POWER STEERING
1. Remove 473ml of
power steering fluid from the oil reservoir.
2. Pour the contents of the PROTEX # 94100 MTS CLEANER
bottle into the
power steering fluid reservoir.
3. Run the engine at idle for 2 minutes while turning
the steering wheel complete
from all the way left to all the way right.
4. Finish by leaving the steering wheel turned
completely to the left in order to
drain the fluid.
5. Add new power steering fluid PROTEX # 57110 or #
57130 or # 57140 (depending the need of your vehicle)
until it flows like new from the drain.
PROTEX #94100 MTS
CLEANER is ideal when added to equipment designed to
specifically flush and clean these automotive
components.
CAUTION: NEVER DRIVE
THE VEHICLE WITH PROTEX #94100 MTS CLEANER IN THE
COMPONENT.
|